Pack93z
  • Pack93z
  • Select Member Topic Starter
15 years ago
My biggest worry right now.. I sheared a bolt off in my knee.. now I have to tap into the freaking thing tonight and try and get it out to replace it..

German engineering at its finest.. not in this case damn it. :lol:

Oh on the Packers.. that we lose all mental capacities and I have to don a freaking skirt and pom pom's... NO PEPPER NEEDED. 😉
"The oranges are dry; the apples are mealy; and the papayas... I don't know what's going on with the papayas!"
DakotaT
15 years ago

My biggest worry right now.. I sheared a bolt off in my knee.. now I have to tap into the freaking thing tonight and try and get it out to replace it..

German engineering at its finest.. not in this case damn it. :lol:

Oh on the Packers.. that we lose all mental capacities and I have to don a freaking skirt and pom pom's... NO PEPPER NEEDED. ;)

"pack93z" wrote:




Can you elaborate on "sheering a bolt off in my knee"! That will provide me a much better view on how to make light of this situation.
Pack93z
  • Pack93z
  • Select Member Topic Starter
15 years ago


Can you elaborate on "sheering a bolt off in my knee"! That will provide me a much better view on how to make light of this situation.

"DakotaT" wrote:



In this Mauch knee unit, they have a design issue, with someone of my size I place extreme torque upon a pressure point within the knee design itself.. this morning I went to move a server in the room, over extended on the leg and sheared the bolt cleanly between the casing of the outer knee and the pivot of the inner knee. The same pin/bolt I have had a machine shop here start producing instead of buying it from the company in Germany.. about 180 dollars cheaper and corrected the design flaw of over tapping the threading.

In Packers terms.. booting Colledge out to tackle since he can't seem to remember to keep his ass low at guard.. preventing his said ass from getting run over again. But apparently there is a flaw in thinking since they continually place him as guard. So, I think I need to speak to the coaching staff and remedy the situation.. :lol:
"The oranges are dry; the apples are mealy; and the papayas... I don't know what's going on with the papayas!"
Cheesey
15 years ago

My biggest worry right now.. I sheared a bolt off in my knee.. now I have to tap into the freaking thing tonight and try and get it out to replace it..

German engineering at its finest.. not in this case damn it. :lol:

Oh on the Packers.. that we lose all mental capacities and I have to don a freaking skirt and pom pom's... NO PEPPER NEEDED. ;)

"pack93z" wrote:


Come on TT!
Pull the trigger!!!
PEPPERS to Green Bay!!! :thumbleft:

Pack93z
  • Pack93z
  • Select Member Topic Starter
15 years ago

My biggest worry right now.. I sheared a bolt off in my knee.. now I have to tap into the freaking thing tonight and try and get it out to replace it..

German engineering at its finest.. not in this case damn it. :lol:

Oh on the Packers.. that we lose all mental capacities and I have to don a freaking skirt and pom pom's... NO PEPPER NEEDED. ;)

"Cheesey" wrote:


Come on Ted Thompson!
Pull the trigger!!!
PEPPERS to Green Bay!!! :thumbleft:

"pack93z" wrote:



Careful Cheesey.. I will photoshop you into that Viking garb yet. :wickedfart:
"The oranges are dry; the apples are mealy; and the papayas... I don't know what's going on with the papayas!"
DakotaT
15 years ago


Can you elaborate on "sheering a bolt off in my knee"! That will provide me a much better view on how to make light of this situation.

"pack93z" wrote:



In this Mauch knee unit, they have a design issue, with someone of my size I place extreme torque upon a pressure point within the knee design itself.. this morning I went to move a server in the room, over extended on the leg and sheared the bolt cleanly between the casing of the outer knee and the pivot of the inner knee. The same pin/bolt I have had a machine shop here start producing instead of buying it from the company in Germany.. about 180 dollars cheaper and corrected the design flaw of over tapping the threading.

:lol:

"DakotaT" wrote:




So when your dentures don't quite fit right, do you take them back to the dentist, or do you get out the pocket knife and whittle away? Don't laugh too hard, I know lots of people like that.
Cheesey
15 years ago

My biggest worry right now.. I sheared a bolt off in my knee.. now I have to tap into the freaking thing tonight and try and get it out to replace it..

German engineering at its finest.. not in this case damn it. :lol:

Oh on the Packers.. that we lose all mental capacities and I have to don a freaking skirt and pom pom's... NO PEPPER NEEDED. ;)

"pack93z" wrote:


Come on Ted Thompson!
Pull the trigger!!!
PEPPERS to Green Bay!!! :thumbleft:

"Cheesey" wrote:



Careful Cheesey.. I will photoshop you into that Viking garb yet. :wickedfart:

"pack93z" wrote:


I ain't ascared!!!! Go on and do your wor......uh.....wait........forget that last part........LOLOLOL!! :thumbleft:

Pack93z
  • Pack93z
  • Select Member Topic Starter
15 years ago


Can you elaborate on "sheering a bolt off in my knee"! That will provide me a much better view on how to make light of this situation.

"DakotaT" wrote:



In this Mauch knee unit, they have a design issue, with someone of my size I place extreme torque upon a pressure point within the knee design itself.. this morning I went to move a server in the room, over extended on the leg and sheared the bolt cleanly between the casing of the outer knee and the pivot of the inner knee. The same pin/bolt I have had a machine shop here start producing instead of buying it from the company in Germany.. about 180 dollars cheaper and corrected the design flaw of over tapping the threading.

:lol:

"pack93z" wrote:




So when your dentures don't quite fit right, do you take them back to the dentist, or do you get out the pocket knife and whittle away? Don't laugh too hard, I know lots of people like that.

"DakotaT" wrote:



If the freaking dentist wants to over charge me and I have no freaking other options than to see another one that overcharges because the denture makers material prices are out of wack.. you bet your ass that I am going do what it takes to get the job done.

Seriously.. the insurance company says they aren't paying for any more work.. and a pin that cost less than 20 to make when they want to charge in the hundreds.. damn right I am boycotting the system. It just isn't freaking right.
"The oranges are dry; the apples are mealy; and the papayas... I don't know what's going on with the papayas!"
wpr
  • wpr
  • Preferred Member
15 years ago
What a crappy deal Pack. My concern is did you drop the server?
Pack93z
  • Pack93z
  • Select Member Topic Starter
15 years ago

What a crappy deal Pack. My concern is did you drop the server?

"wpr" wrote:



Nope.. not even close.

My discontent is really with the insurance companies and our health care costs overall.. it is just freaking nuts how much it costs to me to try to keep earning my own way without help from Uncle Sam.

And the thing is, all these companies and hospitals that make these devices know you have no where to turn. It is complete and utter bullshit.
"The oranges are dry; the apples are mealy; and the papayas... I don't know what's going on with the papayas!"
Similar Topics
Users browsing this topic
    Fan Shout
    Zero2Cool (2h) : Struggling to figure out what text editor options are needed and which are 'nice to have'
    Mucky Tundra (4h) : *CHOMP CHOMP CHOMP*
    Zero2Cool (2-Apr) : WR who said he'd break Xavier Worthy 40 time...and ran slower than you
    Mucky Tundra (2-Apr) : Who?
    Zero2Cool (2-Apr) : Texas’ WR Isaiah Bond is scheduled to visit the Bills, Browns, Chiefs, Falcons, Packers and Titans starting next week.
    Zero2Cool (2-Apr) : Spotting ball isn't changing, only measuring distance is, Which wasn't the issue.
    Zero2Cool (2-Apr) : The spotting of the ball IS the issue. Not the chain gang.
    Mucky Tundra (2-Apr) : Will there be a tracker on the ball or something?
    Zero2Cool (1-Apr) : uh oh
    Martha Careful (1-Apr) : Too bad camera's can't spot the ball as well.
    Mucky Tundra (1-Apr) : So will the chain gang be gone completely or will they still be around as a backup or whatever?
    Zero2Cool (1-Apr) : The method for measuring first downs in the NFL will switch from chain gangs to camera-based technology in 2025, the league announced.
    Martha Careful (1-Apr) : A big step in the right direction. Just put in the college system is very very good.
    Zero2Cool (1-Apr) : NFL has passed a rule that allows both teams to possess the ball in OT during the regular season
    Zero2Cool (1-Apr) : Touchbacks on kickoffs will now bring the ball to the 35-yard line.
    beast (31-Mar) : It might of gotten more popular recently, but braiding hair (even men) in certain cultures goes back for centuries.
    Martha Careful (30-Mar) : Is men braiding their hair a new style thing? Watching the NCAA men's tournament many players have done
    Zero2Cool (29-Mar) : Ha. Well, it'd be nice for folks to reset their own password. Via validated email 😏
    beast (29-Mar) : Monopoly was supposed to be an educational game, that show how evil capitalism was and how we should avoid it
    beast (29-Mar) : Lol, I was thinking username would be better, as then I wouldn't have to keep an email up to date lol 😂
    beast (29-Mar) : Zero2Cool (25-Mar) : I was thinking email because I think it'll make folks keep it up todate lol
    wpr (29-Mar) : sure is
    Zero2Cool (29-Mar) : Monopoly is a rip off of The Landlord's Game
    wpr (27-Mar) : 28 days until the draft
    earthquake (27-Mar) : Which seemed strange to my 9 year old self, that you could be a fan for a team other than the one you play for
    earthquake (27-Mar) : Nothing eventful happened, other than it being clear that he was a bengals fan
    earthquake (27-Mar) : And we went and hung out with him one afternoon, I must have been 9 or so
    earthquake (27-Mar) : That’s wild, when I was a kid my friend lived in the same apartment complex in De Pere
    Mucky Tundra (27-Mar) : Only career highspot was a 200 yard rushing game while playing for the Cardinals
    Mucky Tundra (27-Mar) : He is a former Packer. Drafted out of Northern Illinois. Didn't do much in GB.
    dfosterf (26-Mar) : Despicable
    Zero2Cool (26-Mar) : Former NFL. I think Packers too
    Zero2Cool (26-Mar) : NFL RB Leshon Johnson has been charged in a massive dog fighting operation, with the FBI seizing over 190 Pit Bulls
    Mucky Tundra (26-Mar) : Some real irony of a QB as short as Wilson playing for the Giants
    Mucky Tundra (26-Mar) : Giants country, let's be the tall beings of lore!
    Mucky Tundra (26-Mar) : Russell Wilson signs with the Giants.
    Zero2Cool (25-Mar) : I was thinking email because I think it'll make folks keep it up todate lol
    wpr (25-Mar) : I don't think there is a significant difference. I use a user name for many. Others email.
    Martha Careful (25-Mar) : email
    Zero2Cool (25-Mar) : would it be better to use EMAIL or USERNAME to log into a site?
    wpr (25-Mar) : Thanks Zero
    Zero2Cool (24-Mar) : New forum has the ability to Thank a post now.
    beast (24-Mar) : And the only time they have won the Championship in an even year, was the first time they did, in 2006.
    beast (24-Mar) : Since 2007, there have been 10 odd numbered years, Wisconsin Women have won the Championship in 7 of those 10 odd numbered years.
    buckeyepackfan (24-Mar) : Congratulations Lady Badger Hockey Team. NATIONAL CHAMPIONS!!
    Zero2Cool (23-Mar) : I don't think it's completed yet. it was just announced last month, right?
    dhazer (23-Mar) : did netflix ever release the Packers documentary
    Zero2Cool (21-Mar) : And it is glorious!
    beast (21-Mar) : Unsigned FA QB Rodgers is supposedly in the Steelers building
    Martha Careful (19-Mar) : But I don't own a car! So can I still use it in my apartment?
    Please sign in to use Fan Shout
    2024 Packers Schedule
    Friday, Sep 6 @ 7:15 PM
    Eagles
    29 - 34
    Sunday, Sep 15 @ 12:00 PM
    COLTS
    16 - 10
    Sunday, Sep 22 @ 12:00 PM
    Titans
    30 - 14
    Sunday, Sep 29 @ 12:00 PM
    VIKINGS
    29 - 31
    Sunday, Oct 6 @ 3:25 PM
    Rams
    24 - 19
    Sunday, Oct 13 @ 12:00 PM
    CARDINALS
    34 - 13
    Sunday, Oct 20 @ 12:00 PM
    TEXANS
    24 - 22
    Sunday, Oct 27 @ 12:00 PM
    Jaguars
    30 - 27
    Sunday, Nov 3 @ 3:25 PM
    LIONS
    14 - 24
    Sunday, Nov 17 @ 12:00 PM
    Bears
    20 - 19
    Sunday, Nov 24 @ 3:25 PM
    49ERS
    38 - 10
    Thursday, Nov 28 @ 7:20 PM
    DOLPHINS
    30 - 17
    Thursday, Dec 5 @ 7:15 PM
    Lions
    31 - 34
    Sunday, Dec 15 @ 7:20 PM
    Seahawks
    30 - 13
    Monday, Dec 23 @ 7:15 PM
    SAINTS
    34 - 0
    Sunday, Dec 29 @ 3:25 PM
    Vikings
    25 - 27
    Sunday, Jan 5 @ 12:00 PM
    BEARS
    22 - 24
    Sunday, Jan 12 @ 3:30 PM
    Eagles
    10 - 22
    Recent Topics
    11h / Green Bay Packers Talk / Zero2Cool

    7-Apr / Feedback, Suggestions and Issues / Zero2Cool

    2-Apr / Green Bay Packers Talk / Zero2Cool

    2-Apr / Green Bay Packers Talk / bboystyle

    1-Apr / Green Bay Packers Talk / Mucky Tundra

    1-Apr / Green Bay Packers Talk / wpr

    31-Mar / Green Bay Packers Talk / Zero2Cool

    30-Mar / Green Bay Packers Talk / Zero2Cool

    29-Mar / Random Babble / wpr

    28-Mar / Feedback, Suggestions and Issues / dfosterf

    28-Mar / Random Babble / Martha Careful

    26-Mar / Random Babble / Mucky Tundra

    25-Mar / Random Babble / Martha Careful

    24-Mar / Random Babble / packerfanoutwest

    24-Mar / Random Babble / Zero2Cool

    Headlines
    Copyright © 2006 - 2025 PackersHome.com™. All Rights Reserved.