Pack93z
  • Pack93z
  • Select Member Topic Starter
15 years ago
My biggest worry right now.. I sheared a bolt off in my knee.. now I have to tap into the freaking thing tonight and try and get it out to replace it..

German engineering at its finest.. not in this case damn it. :lol:

Oh on the Packers.. that we lose all mental capacities and I have to don a freaking skirt and pom pom's... NO PEPPER NEEDED. ๐Ÿ˜‰
"The oranges are dry; the apples are mealy; and the papayas... I don't know what's going on with the papayas!"
DakotaT
15 years ago

My biggest worry right now.. I sheared a bolt off in my knee.. now I have to tap into the freaking thing tonight and try and get it out to replace it..

German engineering at its finest.. not in this case damn it. :lol:

Oh on the Packers.. that we lose all mental capacities and I have to don a freaking skirt and pom pom's... NO PEPPER NEEDED. ;)

"pack93z" wrote:




Can you elaborate on "sheering a bolt off in my knee"! That will provide me a much better view on how to make light of this situation.
UserPostedImage
Pack93z
  • Pack93z
  • Select Member Topic Starter
15 years ago


Can you elaborate on "sheering a bolt off in my knee"! That will provide me a much better view on how to make light of this situation.

"DakotaT" wrote:



In this Mauch knee unit, they have a design issue, with someone of my size I place extreme torque upon a pressure point within the knee design itself.. this morning I went to move a server in the room, over extended on the leg and sheared the bolt cleanly between the casing of the outer knee and the pivot of the inner knee. The same pin/bolt I have had a machine shop here start producing instead of buying it from the company in Germany.. about 180 dollars cheaper and corrected the design flaw of over tapping the threading.

In Packers terms.. booting Colledge out to tackle since he can't seem to remember to keep his ass low at guard.. preventing his said ass from getting run over again. But apparently there is a flaw in thinking since they continually place him as guard. So, I think I need to speak to the coaching staff and remedy the situation.. :lol:
"The oranges are dry; the apples are mealy; and the papayas... I don't know what's going on with the papayas!"
Cheesey
15 years ago

My biggest worry right now.. I sheared a bolt off in my knee.. now I have to tap into the freaking thing tonight and try and get it out to replace it..

German engineering at its finest.. not in this case damn it. :lol:

Oh on the Packers.. that we lose all mental capacities and I have to don a freaking skirt and pom pom's... NO PEPPER NEEDED. ;)

"pack93z" wrote:


Come on TT!
Pull the trigger!!!
PEPPERS to Green Bay!!! :thumbleft:
UserPostedImage
Pack93z
  • Pack93z
  • Select Member Topic Starter
15 years ago

My biggest worry right now.. I sheared a bolt off in my knee.. now I have to tap into the freaking thing tonight and try and get it out to replace it..

German engineering at its finest.. not in this case damn it. :lol:

Oh on the Packers.. that we lose all mental capacities and I have to don a freaking skirt and pom pom's... NO PEPPER NEEDED. ;)

"Cheesey" wrote:


Come on Ted Thompson!
Pull the trigger!!!
PEPPERS to Green Bay!!! :thumbleft:

"pack93z" wrote:



Careful Cheesey.. I will photoshop you into that Viking garb yet. :wickedfart:
"The oranges are dry; the apples are mealy; and the papayas... I don't know what's going on with the papayas!"
DakotaT
15 years ago


Can you elaborate on "sheering a bolt off in my knee"! That will provide me a much better view on how to make light of this situation.

"pack93z" wrote:



In this Mauch knee unit, they have a design issue, with someone of my size I place extreme torque upon a pressure point within the knee design itself.. this morning I went to move a server in the room, over extended on the leg and sheared the bolt cleanly between the casing of the outer knee and the pivot of the inner knee. The same pin/bolt I have had a machine shop here start producing instead of buying it from the company in Germany.. about 180 dollars cheaper and corrected the design flaw of over tapping the threading.

:lol:

"DakotaT" wrote:




So when your dentures don't quite fit right, do you take them back to the dentist, or do you get out the pocket knife and whittle away? Don't laugh too hard, I know lots of people like that.
UserPostedImage
Cheesey
15 years ago

My biggest worry right now.. I sheared a bolt off in my knee.. now I have to tap into the freaking thing tonight and try and get it out to replace it..

German engineering at its finest.. not in this case damn it. :lol:

Oh on the Packers.. that we lose all mental capacities and I have to don a freaking skirt and pom pom's... NO PEPPER NEEDED. ;)

"pack93z" wrote:


Come on Ted Thompson!
Pull the trigger!!!
PEPPERS to Green Bay!!! :thumbleft:

"Cheesey" wrote:



Careful Cheesey.. I will photoshop you into that Viking garb yet. :wickedfart:

"pack93z" wrote:


I ain't ascared!!!! Go on and do your wor......uh.....wait........forget that last part........LOLOLOL!! :thumbleft:
UserPostedImage
Pack93z
  • Pack93z
  • Select Member Topic Starter
15 years ago


Can you elaborate on "sheering a bolt off in my knee"! That will provide me a much better view on how to make light of this situation.

"DakotaT" wrote:



In this Mauch knee unit, they have a design issue, with someone of my size I place extreme torque upon a pressure point within the knee design itself.. this morning I went to move a server in the room, over extended on the leg and sheared the bolt cleanly between the casing of the outer knee and the pivot of the inner knee. The same pin/bolt I have had a machine shop here start producing instead of buying it from the company in Germany.. about 180 dollars cheaper and corrected the design flaw of over tapping the threading.

:lol:

"pack93z" wrote:




So when your dentures don't quite fit right, do you take them back to the dentist, or do you get out the pocket knife and whittle away? Don't laugh too hard, I know lots of people like that.

"DakotaT" wrote:



If the freaking dentist wants to over charge me and I have no freaking other options than to see another one that overcharges because the denture makers material prices are out of wack.. you bet your ass that I am going do what it takes to get the job done.

Seriously.. the insurance company says they aren't paying for any more work.. and a pin that cost less than 20 to make when they want to charge in the hundreds.. damn right I am boycotting the system. It just isn't freaking right.
"The oranges are dry; the apples are mealy; and the papayas... I don't know what's going on with the papayas!"
wpr
  • wpr
  • Preferred Member
15 years ago
What a crappy deal Pack. My concern is did you drop the server?
UserPostedImage
Pack93z
  • Pack93z
  • Select Member Topic Starter
15 years ago

What a crappy deal Pack. My concern is did you drop the server?

"wpr" wrote:



Nope.. not even close.

My discontent is really with the insurance companies and our health care costs overall.. it is just freaking nuts how much it costs to me to try to keep earning my own way without help from Uncle Sam.

And the thing is, all these companies and hospitals that make these devices know you have no where to turn. It is complete and utter bullshit.
"The oranges are dry; the apples are mealy; and the papayas... I don't know what's going on with the papayas!"
Fan Shout
wpr (3h) : Jets are Packers (L)East
Zero2Cool (11h) : Jets released K Riley Patterson and signed K Anders Carlson to the practice squad.
wpr (11h) : Thanks guys
Mucky Tundra (7-Nov) : Happy Birthday wpr!
Zero2Cool (7-Nov) : Anders Carlson ... released by 49ers
dfosterf (7-Nov) : Happy Birthday!๐Ÿ˜Š๐Ÿ˜Š๐Ÿ˜Š
wpr (7-Nov) : Thanks Kevin.
Zero2Cool (7-Nov) : Happy Birthday, Wayne! ๐ŸŽ‰๐ŸŽ‚๐Ÿฅณ
beast (7-Nov) : Edge Rushers is the same... it's not the 4-3 vs 3-4 change, it's the Hafley's version of the 4-3... as all 32 teams are actually 4-2
Zero2Cool (6-Nov) : OLB to DE and player requests trade. Yet folks say they are same.
beast (5-Nov) : In other news, the Green Bay Packers have signed Zero2Cool to update their website ๐Ÿ˜‹ jk
beast (5-Nov) : Might just re-sign the kicker we got
beast (5-Nov) : Are there any kickers worth drafting next year?
Zero2Cool (5-Nov) : Preston Smith for Malik Willis
Mucky Tundra (5-Nov) : Getting a 7th rounder from the Stillers
Zero2Cool (5-Nov) : At least we get 7th round pick now!! HELLO NEW KICKER
Mucky Tundra (5-Nov) : Steelers getting a premier lockdown corner!
Zero2Cool (5-Nov) : Packers are trading edge rusher Preston Smith to the Pittsburgh Steelers, per sources.
Mucky Tundra (5-Nov) : Preston Smith traded to the Steelers!!!!
Zero2Cool (5-Nov) : CB Marshon Lattimore to Commanders
Zero2Cool (5-Nov) : Bears are sending RB Khalil Herbert to the Bengals, per sources.
Zero2Cool (5-Nov) : ZaDarius Smith continues his "north" tour.
Zero2Cool (5-Nov) : Let the Chiefs trade a 5th for him
Zero2Cool (5-Nov) : Nearing 30, large contract, nope.
Martha Careful (5-Nov) : any interest in Marshon Lattimore?
Zero2Cool (4-Nov) : What does NFL do if they're over cap?
Mucky Tundra (4-Nov) : They've been able to constantly push it out through extensions, void years etc but they're in the hole by 72 million next year I believe
hardrocker950 (4-Nov) : Seems the Saints are always in cap hell
Mucky Tundra (4-Nov) : Saints HC job is not an envious one; gonna be in cap hell for 3 years
Mucky Tundra (4-Nov) : Dennis Allen has now been fired twice mid-season with Derek Carr as his starting QB
Zero2Cool (4-Nov) : Kuhn let go
beast (4-Nov) : I wonder if the Packers would have any interest in Z. Smith, probably not
Zero2Cool (4-Nov) : Shefter says Browns and Lions will figure out how to get a deal done for Za'Darius Smith..
Zero2Cool (4-Nov) : Packers are more likely to have 1,000 yard rusher than 4,000 yard passer
Zero2Cool (3-Nov) : It's raining hard.
Zero2Cool (3-Nov) : Packers inactives vs. Lions: CB Jaire Alexander S Evan Williams C Josh Myers Non-injury inactives: WR Malik Heath OL Travis Glover DE Bren
packerfanoutwest (3-Nov) : Malik Willis: My focus is helping the Packers win, not proving I can start elsewhere. But he could
Zero2Cool (1-Nov) : I had Texans, but the loss of another WR flipped me
wpr (1-Nov) : I thought about taking the Jets but they've been a disaster. Losing to the Pats last week
Zero2Cool (1-Nov) : Surprised more didn't pick Jets in Pick'em.
Please sign in to use Fan Shout
2024 Packers Schedule
Friday, Sep 6 @ 7:15 PM
Eagles
Sunday, Sep 15 @ 12:00 PM
COLTS
Sunday, Sep 22 @ 12:00 PM
Titans
Sunday, Sep 29 @ 12:00 PM
VIKINGS
Sunday, Oct 6 @ 3:25 PM
Rams
Sunday, Oct 13 @ 12:00 PM
CARDINALS
Sunday, Oct 20 @ 12:00 PM
TEXANS
Sunday, Oct 27 @ 12:00 PM
Jaguars
Sunday, Nov 3 @ 3:25 PM
LIONS
Sunday, Nov 17 @ 12:00 PM
Bears
Sunday, Nov 24 @ 3:25 PM
49ERS
Thursday, Nov 28 @ 7:20 PM
DOLPHINS
Thursday, Dec 5 @ 7:15 PM
Lions
Sunday, Dec 15 @ 7:20 PM
Seahawks
Monday, Dec 23 @ 7:15 PM
SAINTS
Sunday, Dec 29 @ 12:00 PM
Vikings
Saturday, Jan 4 @ 11:00 PM
BEARS
Recent Topics
11h / Green Bay Packers Talk / buckeyepackfan

8-Nov / Around The NFL / beast

6-Nov / Green Bay Packers Talk / Zero2Cool

6-Nov / Green Bay Packers Talk / Zero2Cool

6-Nov / Green Bay Packers Talk / beast

6-Nov / Green Bay Packers Talk / Martha Careful

5-Nov / Green Bay Packers Talk / Mucky Tundra

5-Nov / Green Bay Packers Talk / Zero2Cool

5-Nov / Featured Content / Zero2Cool

5-Nov / GameDay Threads / Cheesey

5-Nov / Green Bay Packers Talk / Martha Careful

5-Nov / Green Bay Packers Talk / Martha Careful

5-Nov / Green Bay Packers Talk / Martha Careful

4-Nov / Green Bay Packers Talk / beast

2-Nov / Around The NFL / wpr

Headlines
Copyright ยฉ 2006 - 2024 PackersHome.comโ„ข. All Rights Reserved.